Hydraulic cylinder selection

How to choice the Hydraulic Cylinder and attachment

Step 1:Choice the hydraulic cylinder suitable for the working situation;

Step 2:Choice the hydraulic pump suitable for the cylinder and the working situation;

Step 3: Choice the hydraulic attachment;

How to choice the Hydraulic Cylinders condition

l The stress of cylinder ( the rated pressure of cylinder is 20% more than actual loading capacity:

Cylinder force ( kg ) = Active area of cylinder (cm²) X hydraulic pump Pressure ( bat ).

l Height and stroke of cylinder requirement:

Choice the correct height and stroke of cylinder according to the working situation.

l Which way of the cylinder use for :

Single-action only use for jack up , double-action can use for jack up and pul back.

l Whether need several cylinders are used together:

Make sure the point quantity of jack up.

l Make sure the fuel capacity of hydraulic cylinder:

Fuel capacity (cm³) = The active area of cylinder X the stroke of cylinder (cm²)

l Whether need the steel stick or cable through off the hydraulic cylinder :

Choice the Hollow hydraulic cylinder ( SSZ , SJZ series ).

l Whether need working at narrow space:

Choice the low flat hydraulic cylinder ( SSB , SSC , SSL series).

l Whether need control with jack up and pull back :

Double-acting series cylinders with hydraulic check valve.

l Whether need keep the loading with long time:

Choice lock-nut hydraulic cylinder(SSL , SJL series )

l Whether need hydraulic cylinder with partial load work:

Choice tilting saddle.

l Whether need several hydraulic cylinder are working together :

Choice Synchronous lifting system ( SPHF , SPHP series )